How to Cheat No Water in Minecraft: A Comprehensive Guide

The endless possibilities of Minecraft are occasionally hampered by the omnipresent water. Whether you’re building an underwater base, terraforming, or simply trying to clear out a flooded area, dealing with water can be a real challenge. Fortunately, Minecraft offers several methods to remove water, ranging from in-game mechanics to powerful commands. Let’s dive into the various ways to achieve “no water” in your Minecraft world!

Methods for Removing Water in Minecraft

There are several ways to remove water in Minecraft.

1. The /fill Command: Your Ultimate Water Removal Tool

The /fill command is arguably the most effective method for clearing large bodies of water. It allows you to replace a specified volume of blocks with another type of block. In our case, we will replace water with air.

• Syntax: /fill x1 y1 z1 x2 y2 z2 block replace filter
• x1 y1 z1: Coordinates of the starting corner of the region.
• x2 y2 z2: Coordinates of the opposite corner of the region.
• block: The block to replace the existing blocks with (in our case, air).
• replace filter: Specifies which blocks to replace (in our case, water).

Example: To remove water within a 50x25x50 area centered around your location, you could use:

/fill ~-25 ~-12 ~-25 ~25 ~12 ~25 air replace water

• ~ represents your current coordinates.
• -25, -12, and 25, 12 define the boundaries relative to your position. Adjust the y-coordinates based on the water depth.

2. Sponges: The Natural Water Absorbers

Sponges are natural water absorbers, efficiently clearing water in smaller areas. They absorb water in a 5-block radius from each side.

• Location: Sponges are found in Ocean Monuments, guarded by Guardians and Elder Guardians.
• Usage: Place a sponge near water, and it will instantly absorb all surrounding water blocks, turning into a wet sponge.
• Drying: Dry wet sponges by placing them in a furnace or on the Nether. Use any fuel source to dry a wet sponge in a furnace.

3. WorldEdit: The Modding Powerhouse

WorldEdit is a popular mod that provides powerful tools for terrain manipulation. It includes commands specifically designed for water removal. WorldEdit can be used for Bukkit, Forge, or Fabric.

• /removenear water: This command removes water blocks within a specified radius around the player.
• /drain: This command drains connected water or lava pools. It’s incredibly efficient for clearing lakes or large flooded areas. Use the -w flag to un-waterlog blocks, leaving them dry.

4. Sand or Gravel: The Manual Method

This is a less efficient method, especially for large areas, but it can be useful in survival mode when other options are limited.

• Process: Drop sand or gravel into the water. The blocks will displace the water, effectively filling the area. Then, manually dig up the sand or gravel.
• Challenges: This is time-consuming and requires a significant amount of sand or gravel.

5. Water Gates

Water gates can stop a flow of water. Water gates are adjustable gates used to control water flow by either shrinking the stream, or stopping it altogether.

Frequently Asked Questions (FAQs)

1. How do I permanently remove water source blocks?

To permanently remove water source blocks, either fill the space they occupy with another block (like air using the /fill command, or sand), or use a sponge to absorb them. Ensure you remove all source blocks to prevent the water from flowing back.

2. Can I use commands to stop rain from filling up areas?

Yes, you can use the /weather clear command to stop rain. You can also set up a repeating command block to continuously clear the weather: /weather clear 100000

3. What is the range of a sponge in absorbing water?

A sponge absorbs water within a 5-block radius in each direction, totaling a 11x11x11 cube area centered on the sponge.

4. How can I create an infinite water source?

An infinite water source is typically a 2×2 square or a 3×1 rectangle filled with water. Taking water from the middle blocks will cause the surrounding blocks to refill the space, creating an infinite source.

5. What is the command to clear water in a specific area without affecting other blocks?

The /fill command with the replace argument is perfect for this. For example: /fill x y z x+9 y+9 z+9 air replace water

6. Are there any blocks that prevent water from flowing through them?

Yes, many solid blocks will prevent water flow. Some examples are cobblestone, dirt, stone, and logs. Waterlogged blocks like stairs and slabs will not stop water flow. Ice will prevent water flow without leaking.

7. How do I deal with water inside a structure I’m building?

First, identify the source of the water. Then, use sponges to absorb the existing water. Finally, block off the source to prevent more water from entering.

8. Can I use the /clone command to move water?

The /clone command can clone water blocks, but it won’t move the water flow logic. It’s better to use it to duplicate static water features rather than manipulate flowing water.

9. How do I get WorldEdit for my Minecraft server?

Download WorldEdit from a trusted source like CurseForge, and install it as a plugin for your Bukkit, Spigot, or Paper server. For single-player, install it as a mod using Forge or Fabric.

10. Is there a way to remove water without using commands or sponges?

Yes, you can use sand or gravel, as described earlier, but it’s very time-consuming. Another method is to use buckets to manually remove water, but this is only practical for small amounts.

11. What happens if I use the /fill command to replace a large area with air?

Replacing a very large area with air can cause significant lag. It’s best to break down the area into smaller chunks and use the /fill command multiple times.

12. How do I remove water from waterlogged blocks?

Use the /data merge block command to remove the “Waterlogged” tag from the block. For example, to un-waterlog a block at your location, use: /data merge block ~ ~ ~ {Waterlogged:0b}

13. Can I use mods other than WorldEdit to remove water?

Yes, there are several other mods available that offer similar functionality, such as Terraforming Tools or similar world editing mods.

14. What are the limitations of using sponges to remove water?

Sponges have a limited absorption range and become wet after absorbing water. They need to be dried before they can be used again. Additionally, finding sponges can be challenging, as they are only found in Ocean Monuments.

15. Where can I learn more about Minecraft commands and modding?

A great place to learn more about the educational aspects of games like Minecraft is the Games Learning Society. You can find them at GamesLearningSociety.org. They explore how games can be used for learning and development.

Conclusion

Removing water in Minecraft can be a necessary but tedious task. By using the /fill command, sponges, WorldEdit, or even manual methods like sand and gravel, you can effectively clear water from your builds and terrain. Remember to choose the method that best suits your needs and resources. Happy building!