Why Am I Floating in Blade and Sorcery? A Comprehensive Guide

The sensation of floating in Blade and Sorcery can be a frustrating, immersion-breaking experience, especially in a game built on realistic physics interactions. The primary reason you might find yourself seemingly hovering above the ground is a miscalibrated VR floor height. This occurs when the game doesn’t accurately register your actual floor level, causing your in-game avatar to be positioned slightly above where it should be. Thankfully, this is a common issue with a relatively straightforward solution. The most direct fix is to re-run your SteamVR room setup. This recalibrates your play space, ensuring that the floor in the game corresponds with your actual floor. This will usually solve the issue immediately. However, there can be other contributing factors. This article will delve into the reasons behind this and offer further guidance, including additional troubleshooting and frequently asked questions to enhance your Blade and Sorcery experience.

Common Causes and Solutions for Floating in Blade and Sorcery

The Miscalibrated Floor

As previously mentioned, the most frequent culprit for the floating sensation is an incorrect VR floor height. VR systems rely on accurate calibration to map your real-world space to the virtual environment. If this calibration is off, the game will position you incorrectly relative to the ground, resulting in the floating issue.

Solution:

• Re-run SteamVR Room Setup: This is the most reliable solution. Close Blade and Sorcery, open the SteamVR menu, and select “Room Setup.” Follow the on-screen instructions to recalibrate your play space. Make sure to place your controllers on the floor when the prompt asks you to do so.
• Ensure Good Tracking: Make sure your VR headset and controller tracking is working correctly. Obstructions, poor lighting, or reflective surfaces can interfere with tracking, leading to miscalibration. Clear any obstructions from the play area and ensure the area is well-lit.

Seated Play Issues

Sometimes, the issue isn’t a complete miscalibration but stems from inconsistencies between your intended and actual play styles. If you set up the game while standing but then sit down, the in-game floor level won’t match your new position.

Solution:

• Initial Standing Calibration: Start Blade and Sorcery standing up, as prompted by the game.
• Seated Reset: Once in the game’s starting house, sit down and use your VR system’s reset view option. For example, on Oculus, the “Reset View” option is found in the system menu. This will correctly set your seated eye level.

Bug or Mod Conflicts

Though less common than calibration errors, occasional bugs or mod conflicts can sometimes affect player height in the game.

Solution:

• Verify Game Files: Corrupted game files can sometimes lead to unpredictable behaviour. In Steam, right-click on Blade and Sorcery -> Properties -> Local Files -> Verify integrity of game files.
• Disable Mods: If you are using mods, a poorly coded or conflicting mod can cause issues like this. Try disabling all mods and launching the game to see if it resolves the issue. If it does, add mods back one at a time until you identify the culprit.
• Check Player.log: A broken mod can also lead to infinite loading issues. You could try check your player.log, which is located in AppData/LocalLow/Warpfrog. Open it with a text file and check the last few lines, or else ctrl+F the word “crash” and see if it mentions any cause of a crash or other issue.

Frequently Asked Questions (FAQs)

1. How do I move around in Blade and Sorcery?

The primary method of movement in Blade and Sorcery is via the left thumbstick, which allows you to glide along the ground in the direction you push the thumbstick. There is no traditional teleportation movement.

2. Why is Blade and Sorcery stuck on 77 percent?

A broken mod is one common reason for infinite loading, often at around 77%. Another reason could be a game file error or conflict. See the “Bug or Mod Conflicts” section for solutions.

3. What is the point of Blade and Sorcery?

Blade and Sorcery is a medieval fantasy sandbox focused on melee, ranged, and magic combat that utilizes a unique and realistic physics-driven interaction system. The main point of the game is to experiment with the combat system and create your own sandbox experience.

4. Is Blade and Sorcery okay for a 12-year-old?

Blade and Sorcery is generally not suitable for children of any age, even without the gore. The game’s adult rating stems from the intensely violent nature of the combat and the physics-based dismemberment.

5. How do I fix every bug and increase performance in Blade and Sorcery?

While no magic bullet fixes every issue, general steps include ensuring updated graphics drivers, verifying game file integrity, limiting mods, adjusting graphics settings, and periodically re-running your VR setup. You can also check for game performance guides online.

6. Can you sit down while playing Blade and Sorcery?

Yes, but you should initially set your view while standing in the game’s startup menu, then once you load into the starting house, sit down and use the reset view from your headset menu.

7. What does gravity do in Blade and Sorcery?

By holding the trigger, a gravity orb will form. Releasing it will cause a short-range force push. Holding two gravity orbs together, charging them, and pulling your hands apart will create a gravity bubble that makes enemies float.

8. Are there more than three spells in Blade and Sorcery?

The base game features three spells (Fire, Lightning, and Gravity), but the modding community has created many more, including spells like raising the dead or freezing time.

9. Why do I keep dropping my sword in Blade and Sorcery?

In the game’s settings book, change “max arms length” from “drop” to “block” to prevent accidentally dropping weapons.

10. Can you cut arms off in Blade and Sorcery?

Yes, with a heavy weapon like a claymore, and by cutting at the joints at the correct perpendicular angle with a hard swing. Decapitations are common with axes.

11. How do you do gravity field in Blade and Sorcery?

By holding two balls of gravity magic together and pulling your hands apart, you create a purple gravity bubble that makes enemies inside weightless.

12. Can you chop people in half in Blade and Sorcery?

Yes, occasionally you can chop a sizable chunk off a NPC’s body, including bisecting it, with the right hit and weapon.

13. Does Blade and Sorcery give motion sickness?

Blade and Sorcery’s non-teleportation movement can cause motion sickness in some players. Taking breaks and easing into gameplay is crucial for those sensitive to motion.

14. How long can a 10-year-old play VR?

It is generally recommended to limit VR play for children. A recommendation of about two hours a week is cited in the sources above. The specific amount of time will vary based on the child.

15. What time period is Blade and Sorcery set in?

Blade and Sorcery is set in a medieval fantasy setting, although the game is not rooted in a specific historical period. It’s more an amalgamation of medieval aesthetics and fantasy elements.

By understanding the causes of the floating issue and applying the above solutions, you can restore your immersion and enjoy the incredible physics-based combat of Blade and Sorcery. Remember to regularly calibrate your VR system, and be mindful of any seated play or potential mod conflicts. Enjoy your medieval adventures!