How Many FPS is Spider-Man Remastered? A Comprehensive Guide
Fast answer first. Then use the tabs or video for more detail.
- Watch the video explanation below for a faster overview.
- Game mechanics may change with updates or patches.
- Use this block to get the short answer without scrolling the whole page.
- Read the FAQ section if the article has one.
- Use the table of contents to jump straight to the detailed section you need.
- Watch the video first, then skim the article for specifics.
The question of frame rates (FPS) in Spider-Man Remastered is a multi-faceted one, varying greatly depending on the platform and settings. Simply put, there isn’t one single answer. The game’s frame rate performance ranges from a modest 30 FPS on low-end PCs to an impressive 120 FPS on high-end PCs and PlayStation 5 consoles, depending on configuration and mode. Let’s break down the performance by platform to provide a clear understanding of what you can expect:
Frame Rates on Different Platforms
PC
On PC, the achievable frame rate in Spider-Man Remastered is highly dependent on your system specifications. The minimum system requirements, featuring a GeForce GTX 950 or equivalent, aim for a playable 30 FPS at 720p. However, this is considered the bare minimum. Most modern gaming PCs are capable of delivering significantly higher frame rates.
- Entry-Level PCs: With older or entry-level hardware, you can expect to achieve 30-60 FPS at 1080p with low to medium settings.
- Mid-Range PCs: A mid-range gaming PC, equipped with cards like an RTX 3060 or RX 6700 XT, will typically deliver a comfortable 60-100+ FPS at 1080p or 1440p, often at high settings.
- High-End PCs: With a high-end setup, featuring components such as an RTX 3070 or better, or an RX 6800 XT or better, you can push the game to 60 FPS or more at 4K, and even exceed 120 FPS at lower resolutions with optimized settings. The latest high-end graphics cards like the RTX 3080 and 3080 Ti enable extremely high frame rates, particularly at lower resolutions.
- Customizable Settings: One of the greatest strengths of the PC version is the ability to customize settings, allowing players to fine-tune the game to achieve a desired balance between graphical fidelity and frame rate. This includes adjusting shadow quality, ray tracing, texture resolution, and more.
PlayStation 5 (PS5)
The PlayStation 5 offers a more streamlined experience, with different modes optimized for either visual fidelity or performance:
- Fidelity Mode: This mode targets a dynamic 4K resolution with ray-traced reflections, aiming for 30 FPS. The focus is on presenting the highest visual quality possible.
- Performance Mode: This mode uses Insomniac’s temporal injection technology to achieve a dynamic 4K resolution at a smooth 60 FPS. This is a popular choice for players wanting the most fluid gameplay experience.
- Performance RT Mode: (Available in Miles Morales and Spider-Man 2) This option balances ray tracing with 60 FPS with a slight compromise in resolution.
- 120 FPS Output: With the appropriate HDMI 2.1 cable and a monitor or television that supports 120Hz, players can experience Spider-Man Remastered at up to 120 FPS. However, achieving 120 FPS may involve a lower resolution or require the use of dynamic resolution scaling. This is only achievable on screens with HDMI 2.1 and the 120Hz option has to be enabled in the PlayStation’s video output settings.
PlayStation 4 (PS4) and PS4 Pro
The original PlayStation 4 release of Marvel’s Spider-Man targeted 30 FPS. The PS4 Pro version also aimed for 30 FPS while maintaining a higher resolution, usually around 1584p, thanks to dynamic scaling. However, the Remastered version is only available on PS5 and PC.
The Importance of Frame Rate
Frame rate significantly impacts the player experience. A higher frame rate (like 60 FPS or above) results in a smoother, more responsive, and immersive experience. Lower frame rates, such as 30 FPS, while still playable, can sometimes feel less fluid, particularly during fast-paced action sequences. While some people may be content with 30FPS, most will notice the difference between 30 and 60 or higher.
Frequently Asked Questions (FAQs)
Here are some common questions about the frame rate in Spider-Man Remastered:
1. What is the minimum frame rate for an enjoyable experience?
Generally, 30 FPS is considered the minimum for a playable experience. However, for faster-paced games like Spider-Man Remastered, 60 FPS or higher is preferred for smoother gameplay.
2. Is 60 FPS achievable on a PS5?
Yes, the PS5 has a performance mode that targets 60 FPS at a dynamic 4K resolution.
3. What is the best graphics mode for PS5?
The best graphics mode often comes down to preference. If you desire the best visuals, choose Fidelity mode, but for a smoother experience, Performance mode is better. Some may also choose Performance RT mode for the best of both worlds. If you own a suitable TV or monitor, the 120hz mode is also available.
4. Can Spider-Man Remastered achieve 120 FPS on PS5?
Yes, but this requires a compatible 120Hz monitor or TV and a specific setting enabled on the PS5. It also may be necessary to select a lower resolution or use dynamic resolution scaling.
5. How much does my PC hardware affect the frame rate?
Your PC hardware, particularly your GPU and CPU, significantly affects the frame rate. A more powerful GPU will deliver higher FPS at higher resolutions, while a strong CPU will prevent bottlenecks.
6. What is the difference between 30 FPS and 60 FPS?
60 FPS provides a significantly smoother and more responsive experience compared to 30 FPS. The higher frame rate results in less motion blur and a more fluid animation.
7. Can an RTX 3070 run Spider-Man Remastered at 4K 60 FPS?
Yes, an RTX 3070 can generally handle Spider-Man Remastered at 4K 60 FPS with high settings.
8. Does the game run at 120 FPS on a PC?
Yes, a powerful PC can run Spider-Man Remastered at over 120 FPS, particularly if playing at lower resolutions with high-end components.
9. Does frame rate affect input lag?
Yes, higher frame rates can result in lower input lag, making your controls feel more responsive.
10. Is it worth upgrading my graphics card for higher frame rates?
If you are struggling to achieve a satisfactory frame rate, upgrading your graphics card could provide a substantial improvement in performance.
11. What settings can I adjust on PC to boost FPS?
You can adjust settings like shadow quality, texture resolution, ambient occlusion, and ray tracing to significantly impact frame rate. Lowering these can result in a significant FPS gain.
12. Is the PS5 version of Spider-Man Remastered worth it?
Yes, the PS5 version features notable improvements over the PS4, including better visuals and ray tracing, as well as the option for a 60 FPS performance mode.
13. Is 30 FPS acceptable for gaming?
While some may find it acceptable, for action-packed games like Spider-Man Remastered, most players prefer the more fluid experience offered by 60 FPS or higher.
14. Is the visual quality much lower when playing at 60 FPS versus 30 FPS on PS5?
Not significantly, the dynamic 4K resolution at 60 FPS maintains impressive visuals, just with slightly fewer graphical effects than the 30 FPS Fidelity Mode.
15. Is there a 40 FPS mode in Spider-Man Remastered?
No, the 40 FPS mode is available in later games in the series such as Marvel’s Spider-Man 2. It is not an option in Spider-Man Remastered.
Conclusion
The frame rate of Spider-Man Remastered is a variable element, influenced heavily by your chosen platform and the selected graphical settings. While lower-end PCs can achieve a playable 30 FPS, most mid-range and high-end PCs and PS5 owners can enjoy a smooth 60 FPS experience or higher, with the PS5 even supporting a 120 FPS output on compatible displays. Understanding the trade-offs between visual quality and performance is key to optimizing your personal experience with Spider-Man Remastered.