What Button is Bluetooth on Xbox Controller?
Fast answer first. Then use the tabs or video for more detail.
- Watch the video explanation below for a faster overview.
- Game mechanics may change with updates or patches.
- Use this block to get the short answer without scrolling the whole page.
- Read the FAQ section if the article has one.
- Use the table of contents to jump straight to the detailed section you need.
- Watch the video first, then skim the article for specifics.
The Bluetooth functionality on an Xbox Wireless Controller is activated using the Pair button, which is often labeled in literature with a small circular icon. This button is usually located in different places depending on the model:
- On the **Xbox Series S**, the **Pair button** is on the front left, next to the **USB port**.
- On the **original Xbox One**, the **Pair button** is a circular button on the side, near the disc tray.
- On the **Xbox One X** and **Xbox One S**, the **Pair button** is on the front right, below the power button.
This article will dive into everything you need to know about pairing your controller with a Bluetooth device.
Frequently Asked Questions (FAQs)
How do I put my Xbox controller in Bluetooth mode?
To put your Xbox controller in Bluetooth mode, first, turn on your controller by pressing the Xbox button. Then, press and hold the Pair button for three seconds and release. Your controller will start flashing rapidly, indicating it is in Bluetooth mode and ready to pair.
How do I turn off my controller when it’s connected to a phone via Bluetooth?
To turn off your controller while it’s connected to a phone via Bluetooth, press and hold the Xbox button for 5-10 seconds until the controller powers off. This will disconnect it from your phone and turn it off completely.
How do I know if my Xbox controller has Bluetooth?
The easiest way to determine if your Xbox controller has Bluetooth is to look at the plastic surrounding the Guide button. If it matches the face of the controller without any seams, you have a controller with Bluetooth capabilities.
There are a few signifiers to look out for:
- Xbox One controller model numbers 1537, 1697, and 1708 have Bluetooth capabilities but only 1708 has a built-in Bluetooth connection making it easy to use with smartphones, PCs, and Smart TVs. Ensure you’re using the latest firmware as this matters too.
How do I know if my Xbox controller is in pairing mode?
When your Xbox controller is in pairing mode, the Xbox button will start flashing rapidly. This indicates that the controller is ready to be paired with a new device. Ensure you press and hold the Pair Button for about 3 seconds until this occurs.
Can I use my Xbox controller in Bluetooth pairing mode while it’s connected via a USB cable?
When you connect your Xbox controller via USB initially you should go to Bluetooth settings to start the pairing process, click start and then go to Devices > Bluetooth and other devices and look for the controller.
How do I connect my Xbox controller without Bluetooth?
If your device does not support Bluetooth, you can still connect your Xbox controller using a USB cable. Here’s how:
- Plug one end of a mini-USB cable into the port on your controller.
- Plug the other end of the cord into your PC’s mini-USB port.
- If your computer still doesn’t connect to your controller, press the Xbox button.
Alternatively, you can use a USB adapter specifically designed for Xbox Wireless Controllers, such as the Xbox Wireless Adapter. This adapter plugs into your PC’s USB port and allows you to connect up to eight Xbox Wireless Controllers wirelessly.
Why won’t my Xbox controller go into pairing mode?
If your Xbox controller won’t go into pairing mode, try the following troubleshooting steps:
- Turn off the controller by pressing and holding the Xbox button for about 6 seconds.
- Turn the controller back on by pressing the Xbox button again.
- Re-pair the controller by pressing and holding the Pair button (the Xbox button on the controller will start flashing rapidly).
If these steps don’t work, try connecting the controller via USB to see if the issue persists. Also,ensure you’re using freshly charged batteries or a fully charged controller.
Can I force my Xbox controller to connect to my PC via Bluetooth?
If your Xbox controller is not connecting to your PC via Bluetooth, try the following steps:
- Ensure your PC supports Bluetooth.
- Turn on your controller by pressing the Xbox button.
- Press and hold the Pair button for three seconds and release.
- On your PC, go to Settings > Devices > Bluetooth & other devices and click Add Bluetooth or other device.
Your PC should now be able to detect your Xbox Wireless Controllerand establish a connection.
Can all Xbox controllers go into Bluetooth mode?
Not all Xbox controllers have Bluetooth capabilities. Typically Xbox Series S controllers and the latest Xbox gamepads support Bluetooth. However, original Xbox One controllers and some older models may not. To check if your controller supports Bluetooth, look for the Model number: only gamepads with serials 1537, 1697 or 1708 have specific Bluetooth capabilities.
Why doesn’t Xbox One controllers have Bluetooth?
There are several reasons why the core Xbox One Console doesn’t use Bluetooth for gaming:
- Bandwidth: The Xbox One’s wireless technology can support up to 8 controllers and headsets with sub 8ms latency, is superior for gaming experiences and isn’t Bluetooth. Using Bluetooth probably you would be limited with 2 controllers.
What console controllers have Bluetooth?
Most modern gaming controllers come with Bluetooth support. Some notable examples include:
- Xbox Elite Wireless Controller
- Xbox Wireless Controller
How do I fix an unresponsive controller after pairing with Bluetooth?
If your Xbox controller becomes unresponsive after pairing with Bluetooth, try the following troubleshooting tips:
- Check the batteries.
- Check the battery contacts.
- Troubleshoot the Xbox One Play & Charge Kit.
- Update the Xbox One controller firmware (find firmwares online or via Xbox settings or via the windows Xbox app.Connect the controller via USB**. .
- Contact Microsoft Xbox Support. to reset or use a factory reset.
- Factory resetting Xbox on settings – it needs to be on then go to settings Settings > System > Configure> Reset Console
This will reset your console and can help with hardware configuration issues.
How do I resynchronise my Xbox controller?
If your Xbox controller has connected and now has a poor connection issue try acting it as new:
To resync an Xbox One controller:
- Turn on your Xbox One.
- Turn on your controller.
- Press the Sync button (usually located on the Xbox One controller chassis) Bluetooth settings on windows.
- Press and hold the Sync Button on the Xbox One controller or Pair Button** 3sets ot for three seconds. If it already shows up on the list of devices on windows allow.
- Release the Sync button when the Xbox light on the controller stops flashing.
Figure 1 – Black Screen of Death
What are some troubleshooting tips that can fix a range of Xbox One controller issues?
The following information offers a few basic guidelines:
- Keep batteries fresh: Ensure your controller batteries are fresh and fully charged. Low batteries can cause connectivity issues.
- Use proper batteries: While some controllers come with rechargeable packs initially use fresh power sources such as NiMH to ensure your controller has a proper charge.
- Ensure your Xbox console is in a proper range from your controller: Ideally controllers should be placed 8m from the device.
These tips should enhance your overall gaming experience significantly.
Here we have explained all you need to know about pairing and **Connecting to *Bluetooth* your My Xbox controller.