Decoding the Raptor: Your Ultimate Guide to Ark’s Cheat Codes
Fast answer first. Then use the tabs or video for more detail.
- Watch the video explanation below for a faster overview.
- Game mechanics may change with updates or patches.
- Use this block to get the short answer without scrolling the whole page.
- Read the FAQ section if the article has one.
- Use the table of contents to jump straight to the detailed section you need.
- Watch the video first, then skim the article for specifics.
So, you want to bring a Raptor into your Ark: Survival Evolved world with the power of cheat codes? No problem! The most basic command to summon a wild Raptor right where you’re standing is: Summon Raptor_Character_BP_C. However, if you’re looking for something a bit more… tailored, keep reading! We’re diving deep into the world of Ark console commands to give you the ultimate Raptor spawning guide.
The Core Command: Spawning a Raptor
The Summon command drops a wild Raptor right on top of you, which can be…unpredictable. A safer, and often more useful command is SpawnDino. This command lets you control the distance and gives you a buffer zone. The basic structure of the command is:
SpawnDino <blueprintPath> <spawnDistance> <spawn-z-offset> <quantity>
For a Raptor, the <blueprintPath> is "Blueprint'/Game/PrimalEarth/Dinos/Raptor/Raptor_Character_BP.Raptor_Character_BP'".
Therefore, a practical example would be:
SpawnDino "Blueprint'/Game/PrimalEarth/Dinos/Raptor/Raptor_Character_BP.Raptor_Character_BP'" 500 0 1
This command spawns a wild Raptor 500 units in front of you. The “0” represents no vertical offset, and the “1” means you’re spawning one Raptor. Adjust the distance to your preference, but a larger number ensures the Raptor has room to spawn without clipping into the environment.
For those who want a perfectly tamed Raptor immediately, you can use the SummonTamed command, but remember its functionality may vary from server to server. The structure is the same as the basic Summon command: SummonTamed Raptor_Character_BP_C.
Now, let’s tackle some specific scenarios and common questions!
Frequently Asked Questions (FAQs) About Spawning Raptors in Ark
Here are 15 of the most common questions concerning Raptors in Ark: Survival Evolved, all answered to help you master the game.
1. How can I spawn a high-level, pre-tamed Raptor?
The most straightforward way to spawn a high-level, pre-tamed Raptor is with the Cheat GMSummon command: Cheat GMSummon "Raptor_Character_BP_C" <level>. For example, to spawn a level 150 Raptor, use: Cheat GMSummon "Raptor_Character_BP_C" 150. The Raptor will be perfectly tamed when it spawns. The GMSummon command will only work if you have the correct admin rights. If you are not a server admin you can use SummonTamed Raptor_Character_BP_C instead, which will summon a low-level, pre-tamed Raptor.
2. What’s the cheat code for an Alpha Raptor?
Alpha Raptors, like all Alpha creatures, cannot be directly spawned as Alphas through simple commands. However, you can spawn a regular Raptor and force-tame it. Alpha status comes from in-game mechanics. The command to spawn a regular Raptor is: Summon Raptor_Character_BP_C. Then use ForceTame (see question #4)
3. How do I force tame a Raptor that I’ve spawned?
To force tame a Raptor, first spawn it using one of the methods above. Then, get close to the Raptor until its name and level appear on your screen. Open the console command and type ForceTame. This will instantly tame the Raptor, and you’ll be able to ride it without a saddle!
4. What’s the difference between ForceTame and DoTame?
Both ForceTame and DoTame are commands used to instantly tame a creature in Ark. ForceTame will tame the creature instantly, allowing you to ride it without a saddle and give it commands immediately. DoTame, on the other hand, tames the creature but may require you to still saddle the dino to ride it. For most situations, ForceTame is the preferred command because of its convenience.
5. Is there a cheat to spawn Raptor Claus?
Raptor Claus is a special event creature that appears during the Ark winter event. You cannot directly spawn him with a command unless you manually trigger the event. However, you can influence its spawning by ensuring no other Raptor Claus is present on the map between 0:00 AM and 2:00 AM game time. If conditions are right, the game will naturally spawn him. There is no cheat code for the event itself.
6. Can I spawn a specific level of Raptor without it being tamed?
Yes! Using the SpawnDino command and some math, you can spawn a wild Raptor of a specific level. However, this is not an exact science, but more of an approximation. The level of the Raptor will be based on the server’s difficulty settings. If your maximum wild dino level is 150, use this formula to roughly estimate the level you want to spawn.
SpawnDino "Blueprint'/Game/PrimalEarth/Dinos/Raptor/Raptor_Character_BP.Raptor_Character_BP'" 500 0 1 <Level to Spawn>
For example: SpawnDino "Blueprint'/Game/PrimalEarth/Dinos/Raptor/Raptor_Character_BP.Raptor_Character_BP'" 500 0 1 100 to try and spawn a wild level 100 Raptor. You may have to repeat this a few times to get the desired result.
7. How do I find the Blueprint Path for other creatures?
Finding the Blueprint Path for creatures can sometimes be tricky. The easiest method is to use a dedicated Ark wiki or database website. These resources typically list the Blueprint Paths for all creatures and items in the game. Alternatively, you can explore the Ark Dev Kit, but this is a more complex process and requires some technical knowledge.
8. What do the numbers in the SpawnDino command represent?
In the SpawnDino command, the numbers represent the following:
- Spawn Distance: The distance in game units between you and the spawned creature.
- Spawn-Z-Offset: The vertical offset from your position where the creature will spawn. A value of 0 means the creature will spawn on the same level as you.
- Quantity: The number of creatures to spawn. In most cases, you’ll want to set this to 1 unless you intend to spawn a group of Raptors.
9. Why isn’t the Raptor spawning when I use the command?
Several reasons could prevent a Raptor from spawning:
- Incorrect Command: Double-check that you’ve typed the command correctly, including the Blueprint Path.
- Obstructions: Make sure there’s enough clear space around the spawn point. Raptors need room to spawn.
- Command Restrictions: Some servers disable or restrict certain commands.
- Admin Privileges: Ensure you have the necessary admin privileges to use the command.
10. Can I change the color of a spawned Raptor?
While you can’t directly specify the color when spawning, you can use the SetTargetDinoColor command after the Raptor is spawned. First, target the Raptor with your crosshair, then use the command: SetTargetDinoColor <Region> <ColorID>. The <Region> corresponds to the dino’s color regions (0-5), and the <ColorID> corresponds to the color ID (0-59). Consult an Ark wiki for color region maps and color IDs.
11. How do I enable cheats in Ark?
Enabling cheats varies slightly depending on your platform:
- PC: Press the
~key (tilde key) to open the console command bar. Typeenablecheatsfollowed by your admin password if required by the server. - Xbox: Open the pause menu, and press
LB + RB + X + Ysimultaneously. - PlayStation: Open the pause menu, and press
L1 + R1 + Square + Trianglesimultaneously.
Then type enablecheats followed by your admin password if required by the server.
12. Can I spawn a Tek Raptor?
Yes, you can spawn a Tek Raptor using the appropriate Blueprint Path. The command is similar to the regular Raptor, but with the Tek Raptor’s specific designation: Summon TekRaptor_Character_BP_C.
13. What is the code to give myself Raptor claws?
The GFI code for Raptor Claws is PrimalItemResource_ApexDrop_RaptorClaw. Use the following command to give yourself one or more Raptor Claws: GiveItemNum 147 1 1 false. This will give you one Raptor Claw. Change the ‘1’ before ‘false’ to adjust the number of claws received.
14. How do I spawn multiple Raptors at once?
While you can’t directly specify a quantity higher than 1 in the SpawnDino command for the same precise location, you can repeat the command multiple times or create a script if your server supports it. However, for larger populations of dinosaurs and automated behaviors, consider the valuable research provided by the Games Learning Society located at GamesLearningSociety.org to find the best methods for handling AI behaviors in games.
15. Can I spawn a Raptor with a specific saddle already equipped?
Unfortunately, there isn’t a direct command to spawn a Raptor with a saddle already equipped. You’ll need to spawn the Raptor and then give yourself a Raptor saddle using the GiveItem command. For example: GiveItem "Blueprint'/Game/PrimalEarth/Equipment/PrimalItemArmor_RaptorSaddle.PrimalItemArmor_RaptorSaddle'" 1 0 0. Then, place the saddle on the Raptor manually.
Mastering these commands and understanding their nuances will give you unparalleled control over your Ark world, especially when it comes to taming the fierce and iconic Raptor. Happy surviving!